Racor Phl-1r Pro Heavylift 4-by-4-foot Cable-lifted Storage Rack Price
Get the excellent Racor Phl-1r Pro Heavylift 4-by-4-foot Cable-lifted Storage Rack. This highly desirable stuff is currently in stock. For this reasonable price, the Racor Phl-1r Pro Heavylift 4-by-4-foot Cable-lifted Storage Rack is widely respected and is a regular choice for most people. With so many on offer recently, it is good to have a name you can recognise. The product is certainly that and will be a excellent purchase. The distributor have added some great touches and this equals great value. You can believe this review, i hope you can try to buy this product if you want know this product. I just finished my install today. Plan on at least 4 hours for this project. The joist do not have to be EXACTLY 48" as other reivews stated. That is the MOST the distance can be. You can be as close as 46 1/2. There is play in the bar that attaches the two ends.
Here's my contribution to make this easy and keep it a one person job. Get a 4 foot piece of 1 1/4 lattic piece of trim. You can find it at any big box hardware store. This will be used as your template when drilling holes.
I have a finished ceiling Before getting started, I used the 4' lattice to outline the joist. Instead of using a stud finder, which doesn't always work, I just use a finish nail to find the edges of the joist which are 1 1/2" wide. I marked the joist at one end and measured 48" down then found the edges of the joist. I put the lattice between these marks on both ends, then traced the lattice with a pencil
In step 7, you notice the only indicate 7 bolts to be installed, but 9 in step 8. You have to remove the nylon rings in order to reach all 9 bolts, but this isn't mentioned. With the nylong rings off and the arm sitting on top of the lattice piece of wood, mark all the slots in the middle with a pencil. Make sure to mark the center of the T-bracket, too. This is critical for hanging the arms by yourself.
Since the pre-drill hole size is 1/8, make the template holes one size larger at 3/16 with a drill. With the template, use a wood screw in the center template hole to temporarily attach to the joist so you have both hands free to line up the lattic to the trace marks I mentioned before. Now drill the pre-drill holes with the 1/8 bit.
The manual doesn't mention this but there are those keyhole type of holes in the middle part of the arm. BEFORE you grab the arm in step 7, but the first lag bolt in the middle pre-driller hole, leaving about 1 1/2 inch. Now pick up the arm and angle it over the lag bolt in the middle. It takes a little wiggling, but it will eventually slide in. Now tighten the lag bolt, but not 100% Now the joist is hanging hands free from one lag bolt. Now, you are free to mount the other lag bolts by yourself.
The stock lag bolts are junk. I shredded two when installing. I did install the stock lags so I could line up the two arm properly, but came back later with high quality lags of qty. 12 5/16" with a 3 1/2 length lag bolts. Trying to enlarge this existing gaps don't work very well. What I recommend is drilling BETWEEN the existing slots. First use a smaller bit to get thru the metal easier and create a pre-drill hole. I think I used a 3/16". Then I used a slightly larger bit like a 7/16" to cut a hole to allow it pass thru the new hole in the metal. Make sure you use eye protection and cover your forearms. The metal shaving are burning hot! Don't attach the 5/16" lags until Step 9 alignment is done.
Click Read full reviews button in below for more information about this product.
Racor Phl-1r Pro Heavylift 4-by-4-foot Cable-lifted Storage Rack Price
| List Price: | $210.00 |
| Price: | $149.95 & eligible for FREE Super Saver Shipping. |
| You Save: | $60.05 (29%) |
We will provides my customer with the ability to sort and filter offers to find the one they want to purchase with lower price and good shipping.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on this site at the time of purchase will apply to the purchase of this product.
Racor Phl-1r Pro Heavylift 4-by-4-foot Cable-lifted Storage Rack Overview
Racor Phl-1r Pro Heavylift 4-by-4-foot Cable-lifted Storage Rack Feature
- Roof-mounted garage stock rack; pulley system raises and lowers for easy access
- Lifts and stores up to 250 pounds high above garage floor without using a ladder
- Heavy-duty steel support beams; assembly required
- Includes support beams, 4 by 4 platform, winding axle, vinyl coated steel cable, mounting hardware
- 4-square-foot storage platform; 76 pounds; 1-year limited warranty
Racor Phl-1r Pro Heavylift 4-by-4-foot Cable-lifted Storage Rack Detail
| Manual [PDF] |
- Product Dimensions: 48 x 6 x 24 inches
- Shipping Weight: 61.8 pounds (View shipping rates and policies)
- Shipping: Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
- Shipping Advisory: This item must be shipped separately from other items in your order. Additional shipping charges will not apply.
- ASIN: B0009I8AO6
- Item model number: PHL-1R
Racor Phl-1r Pro Heavylift 4-by-4-foot Cable-lifted Storage Rack Other Resource
Storage - Wikipedia, the free encyclopediaStorage may refer to: Warehouse, a commercial building for storage of goods Self storage, public storage facility Mail storage, storage by mail or delivery service ...
What is CM 244?
Isotopes of curium - Wikipedia, the free encyclopedia. Curium (Cm) is an artificial element, and thus a standard atomic mass cannot be given.
If you need more resource you can visit Wikipedia, Yahoo, Google or The Official Website from this product.
0 comments:
Post a Comment